I would really appreciate any help. I can't seem to find any diagrams, and whoever had this car before me hooked it up wrong so I don't have a starting point when I replace the regulator. Again thanks for any help on this.
My chart shows:
I = Green w/ Black tracer -> "C" terminal on ignition switch
A = Yellow (noise capacitor filter also connects here) -> Battery +
S = Brown w/ Black tracer -> G on Alternator
F = Orange -> F on Alternator
Becca, Here's my "under hood" regulator wiring placement on a 69 xr7;
I= empty (no wire)
A= filter, mounted below the regulator,..it's a little larger than a AA battery
S= yellow wire and the blue w/red stripe wire
F= orange wire
My charging system is working fine and the amp meter reads to + when motor is running.