Mercury Cougar Owners banner

1 - 12 of 12 Posts

·
Premium Member
Joined
·
4,105 Posts
Discussion Starter #1 (Edited)
Spring Garage cleaning sale!​
I have much more then I have listed here, I would love to clean out much of my current inventory and help you with your projects budget.
Interior parts,
I have 7 1969/70 Cougar dash pads, I have 1 Aqua, 1 ginger 1 dark green and 4 black. None are for a concourse restored car. But are all usable with some cleaning and may be a die job. $50.00 to 125.00 for the Aqua pad.
I have several 1969/70 Consoles none complete. I have a Blue 1970 missing the lid and rear ash tray. One screw hole is broken but would not really show when installed. It will need to be restored. $75.00
I can put together a 1969 Console in Black. I have a standard lid, no hinge and the rear ash tray is only the base. $75.00
I have one more black base with several broken screw holes, $25.00, a ginger 1970 Console clove box that has a 3 inch x 1.5 inch hole cut out of the front. Looks like maybe it had a small Equalizer in it? $10.00. And Several upper sections. $10.00
I have a 1975/76 Torino Console, Not the best one I have ever seen, but ar $35.00 it has a lot of good parts.
I have several sets of Bucket seats 1 set of 1967 Cougar seats including rear seat in Parchment, Drivers seat needs to be recovered, $125.00 for the set. A set of 1968 Mustang buckets in Saddle, Usable with a good cleaning but shows ware in the drivers seat. $75.00 A set of 1969 Cougar seats in Ivy Gold. One seat has damage from a tree landing on the car. $25.00.
Door trims, I have a set of 1967 Cougar Standard trims in Parchment, 1970 Cougar Décor trims in Ginger. I have quarter trims for them also.
I have many small parts for 1967 to 1970 Cougars in stock.


Exterior parts,​
I have a nice 1969 Cougar hood. No rust. The paint looks nasty. It was Light Aqua that some one sprayed primer over. Then some striper has been used. NO damage to the metal. Has a lip molding but that is damaged. $ 125.00
I have a N.O.S 1969 Cougar center Grill. Has some skuffs in the Black paint areas. Nice part in the FORD box. $425.00.
I have a 1970 Cougar. Torino Right hand Sport Mirror. It has no cracks in the base. The Mirror element looks to be an original and needs to be replaced. It needs to be striped and refinished. $150.00
I have some odds and ends in the way of bumpers. I have a set of bumpers for a 1967/68 Thunderbird. $75.00 for the set. Also have some Tail lights. All are only parts though. Free if you buy the bumpers other wise $25.00 each.
1966, Full size Mercury front bumper with brackets. $25.00
1967, Full size Mercury front bumper with brackets. S25.00
1968 Full size Mercury Hood. $25.00

Power train parts,​
I have a bunch of Cast Iron that need to go!
Intakes,
Early 1968 390 428 4V, GT or Thunder Jet, Casting number C8AE-9425- No suffix! Casting date is 7H1.Will need to be hot tanked due to some rust in the plenum $50.00
1971 429/460 4V, Casting number D0VE-9425-B, Casting date 1L13. Dirty. $35.00
1964/65 289 4V, Casting number C5AE-9425-AM, Casting date 4M1. Has damage, a chunk is broken off the top bolt hole for the thermostat housing. Will need welding! $40.00
Edelbrock 351W S.P.2.P. 2V intake. Dirty. $45.00
Early 1970 Cougar/Mustang 9 inch 3:00 open center section. $35.00
Heads, All need rebuilding.
1970 351W D0OE, Casting dates are 9H6 and 9J3 one is a bare casting, $35.00
1968 302 4V C8OE, Casting dates are 7M2 and 8G11 Yep miss matched dates. $50.00
1968 289 2V C8OE Casting dates are 8C11 and 8C14. $30.00
1966 289 C6OE Casting dates are 6L4 and 6L7. Mild exhaust porting. $50.00
I have a pile of Small Block Log style exhaust manifolds. $15.00 each
I have a stack of Air cleaners. I have 1 19712/72 351 CJ unit needing to be restored. $100.00 Ask me if have what you need. Prics range from $20.00 to 35.00 for standard units.
I have a set of Cyclone headers, never been installed. For a 351C2V in 1971/73 Mustangs or Cougars. Lot of scratches in the paint. $125.00.
1967/1979 Big block motor mount insulators and plates. The mounts are newer replacement units with the D1Z part numbers on them, $75.00

Tools!​
I have a Miller “Millermatic 91” welder. It is set up for stick welding. Includes an older welding hood. $75.00

Pictures on request!

_________________________________________________________________________________________
All prices are pick up here at my place. I can delver close in. Shipping will cost ya! LOL. It will be UPS or USPS Priority and only what it costs. no handling charges.
Neal at [email protected] or 425-879-6035. Pleas cal between 8:30AM and noon PST. I work evenings.
Thanks.
 

·
Premium Member
Joined
·
4,105 Posts
Discussion Starter #2
So far I have sold the welder and have a pending sale on the hood.
I hope every one had a Merry Christmas. I did.
 

·
Premium Member
Joined
·
4,105 Posts
Discussion Starter #5
I'll go take a couple after the Seahawks game is over. I don't know if I want them to win or lose!
 

·
Premium Member
Joined
·
4,105 Posts
Discussion Starter #6

·
Premium Member
Joined
·
4,105 Posts
Discussion Starter #7
The hood and black console are sold. Still plenty more.
 

·
Premium Member
Joined
·
4,105 Posts
Discussion Starter #9 (Edited)
No. But I do now have a couple of sets of 70 high back bucket seats. 1set Black standard and a set in ginger hounds tooth. Both ended recovered and maybe new cushions. $250.00 per set.
 

·
Premium Member
Joined
·
4,105 Posts
Discussion Starter #10 (Edited)
Update to this,Spring Garage cleaning sale!

I have much more then I have listed here, I would love to clean out much of my current inventory and help you with your projects budget.
Interior parts,
I have 7 1969/70 Cougar dash pads, I have 1 Aqua, 1 ginger 1 dark green and 4 black. None are for a concourse restored car. But are all usable with some cleaning and may be a die job. $50.00 to 125.00 for the Aqua pad.
I have several 1969/70 Consoles none complete. I have a Blue 1970 missing the lid and rear ash tray. One screw hole is broken but would not really show when installed. It will need to be restored. $75.00
Sold..I can put together a 1969 Console in Black I have a standard lid, no hinge and the rear ash tray is only the base. $75.00
I have one more black base with several broken screw holes, $25.00, a ginger 1970 Console clove box that has a 3 inch x 1.5 inch hole cut out of the front. Looks like maybe it had a small Equalizer in it? $10.00. And Several upper sections. $10.00
NEWRed 1970 Console. Out of a XR-7. Lid is cracked, Base, Glove box and top panel are decent. Will need dieing and several new parts. Easy restore. $150.00
I have a 1975/76 Torino Console, Not the best one I have ever seen, but at $35.00 it has a lot of good parts.
I have several sets of Bucket seats 1 set of 1967 Cougar seats including rear seat in Parchment, Drivers seat needs to be recovered, $125.00 for the set. SOLDA set of 1968 Mustang buckets in Saddle, Usable with a good cleaning but shows ware in the drivers seat. $75.00 A set of 1969 Cougar seats in Ivy Gold. One seat has damage from a tree landing on the car. $25.00.
NEW1 set of 1970 Black Standard high back bucket seats. Need to be recovered. Includes the tracks. $250.(Set)00
NEW1 Set of 1970 XR-7 High back Bucket seatd, Ginger Hounds tooth. Need to be recovered. $250.00(Set)
Door trims, I have a set of 1967 Cougar Standard trims in Parchment, 1970 Cougar Décor trims in Ginger. I have quarter trims for them also.
I have many small parts for 1967 to 1970 Cougars in stock.
NEW1970 AM/FM Stereo. Not working well. Wires have been cut and spliced back together. $250.00
NEW1971 AM.FM Stereo. Works well. No cut wires $350.00


Exterior parts,

SOLDI have a nice 1969 Cougar hood. No rust. The paint looks nasty. It was Light Aqua that some one sprayed primer over. Then some striper has been used. NO damage to the metal. Has a lip molding but that is damaged. $ 125.00
SOLDI have a N.O.S 1969 Cougar center Grill. Has some skuffs in the Black paint areas. Nice part in the FORD box. $425.00.
I have a 1970 Cougar. Torino Right hand Sport Mirror. It has may have cracks in the base(I need to get it out and inspect it). No Mirror element. It needs to be striped and refinished. $75.00
I have some odds and ends in the way of bumpers. I have a set of bumpers for a 1967/68 Thunderbird. $75.00 for the set. Also have some Tail lights. All are only parts though. Free if you buy the bumpers other wise $25.00 each.
1966, Full size Mercury front bumper with brackets. $25.00
1967, Full size Mercury front bumper with brackets. S25.00
1968 Full size Mercury Hood. $25.00

Power train parts,

I have a bunch of Cast Iron that need to go!
Intakes,
Early 1968 390 428 4V, GT or Thunder Jet, Casting number C8AE-9425- No suffix! Casting date is 7H1.Will need to be hot tanked due to some rust in the plenum $50.00
1971 429/460 4V, Casting number D0VE-9425-B, Casting date 1L13. Dirty. $35.00
1964/65 289 4V, Casting number C5AE-9425-AM, Casting date 4M1. Has damage, a chunk is broken off the top bolt hole for the thermostat housing. Will need welding! $40.00
Edelbrock 351W S.P.2.P. 2V intake. Dirty. $45.00
Early 1970 Cougar/Mustang 9 inch 3:00 open center section. $35.00
Heads, All need rebuilding.
1970 351W D0OE, Casting dates are 9H6 and 9J3 one is a bare casting, $35.00
1968 302 4V C8OE, Casting dates are 7M2 and 8G11 Yep miss matched dates. $50.00
1968 289 2V C8OE Casting dates are 8C11 and 8C14. $30.00
1966 289 C6OE Casting dates are 6L4 and 6L7. Mild exhaust porting. $50.00
I have a pile of Small Block Log style exhaust manifolds. $15.00 each
I have a stack of Air cleaners. I have 1 19712/72 351 CJ unit needing to be restored. $100.00 Ask me if have what you need. Prics range from $20.00 to 35.00 for standard units.
I have a set of Cyclone headers, never been installed. For a 351C2V in 1971/73 Mustangs or Cougars. Lot of scratches in the paint. $125.00.
1967/1979 Big block motor mount insulators and plates. The mounts are newer replacement units with the D1Z part numbers on them, $75.00
NEW1970 351C 2V WITH EDELBROCK Performer 351 Intake and EDELBROCK 4V. Runs, but I think it is time for a rebuild.. No funny noises. $200.00

Tools!

SOLDI have a Miller “Millermatic 91” welder. It is set up for stick welding. Includes an older welding hood. $75.00

Pictures on request!

I have much more, Including some extra convertible items that will be added later. Thanks for reading.
 

·
Registered
Joined
·
67 Posts
Greetings BadCatt,

Wondering if you might have an NOS/good quality XR7 hood emblem for a '73? (**Hoping**)
 

·
Premium Member
Joined
·
4,105 Posts
Discussion Starter #12
Greetings BadCatt,

Wondering if you might have an NOS/good quality XR7 hood emblem for a '73? (**Hoping**)
sorry coolfogman, I do not have any 73 parts that I'm aware of.
 
1 - 12 of 12 Posts
Top