Mercury Cougar Owners banner

1 - 6 of 6 Posts

·
Registered
Joined
·
200 Posts
Discussion Starter #1
I picked these up with a load of parts I picked up in LA. I am just about done with my 8.8 explorer rear swap and therefore have no need for the rear discs. I got a really good deal on them and will pass a good deal on to a fellow cougar enthusiast.

They include:
Mounting hardware
Discs (sanded surface rust off and they are smooth)
Pads (didn't look like they were used for long)
Calipers (need cleaned, painted if you don't like silver cast look)

Now I don't know if every last piece is there because I never installed them, but I will take any pictures anyone wants or answer any questions I can to make sure you know what you are getting.

Just looking to get them off my parts shelf and recoupe a small portion of what I paid for all the parts I got. Also interested in trades for 67/68 such as black interior pieces, exterior chrome pieces, good quality XR7 woodgrain dash overlay, etc.

Shoot me an email with offers or trades at [email protected]
 

·
Registered
Joined
·
144 Posts
whats the asking price??
 

·
Registered
Joined
·
200 Posts
Discussion Starter #3
$250 plus shipping I think would be a bargain for both of us. This is roughly a third of what they cost new and they don't look like they were used for any length of time, just a bit dusty.

Here is a link to the exact set that I just found:
http://www.mustangsunlimited.com/itemdy00.asp?T1=A1112+01

When I get home I'll verify that everything pictured is present, from memory it seems it is.
 

·
Registered
Joined
·
200 Posts
Discussion Starter #4 (Edited)
I have three interested parties. After confirming specifics I will go down the list if the first is no longer interested. I will modify this post with the status and future updates.
 

·
Registered
Joined
·
200 Posts
Discussion Starter #5 (Edited)
This picture acurately shows what is in this specific kit, the Mustangs unlimited picture was incorrect (close but not quite it).

http://www.cjponyparts.com/Product.aspx?p=A1112



The only parts missing are the 2 parking brake support brackets. All other parts are there. I should also mention that I don't have the installation instructions, but the link below detailing the whole install is good. Due to these 2 missing brackets I'll drop the price to $200 plus shipping which I think is pretty fair considering one could easily be made or found at a junkyard.

This is the missing brackets, and what they do:
http://www.mustangmonthly.com/howto/mump_0311_rear_disc_brakes_install/photo_10.html

I'm willing to bet this would work perfectly for $5:
http://cgi.ebay.com/ebaymotors/84-87-C4-CORVETTE-RH-PARKING-BRAKE-CABLE-BRACKET-/180470774332?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a04e57a3c

This is the install article of the exact same kit:
http://www.mustangmonthly.com/howto/mump_0311_rear_disc_brakes_install/index.html
 

·
Registered
Joined
·
200 Posts
Discussion Starter #6
These are now sold. Thanks.
 
1 - 6 of 6 Posts
Top