Mercury Cougar Owners banner

1 - 7 of 7 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
I don't know how to get my sequential turn signals working, and its making me mad. Nothing happens with I flip the signal switch, but the hazards do flash when i turn them on. If the hazards are on when I turn the signal switch, then both sides of sequentials go. WHAT THE HECK????? Please Help me, thank you.
 

·
Contributing Member
Joined
·
797 Posts
Think it might be the turn signal switch in the column. Sounds like something that happened to me a while ago. Try pressing in the hazards lightly and have the turn signals on. if they go on, I think it's the column switch.


Steve
 

·
Registered
Joined
·
51 Posts
I had quite a time with mine also, turned out the new turn signal cam I bought had the contact wires a little too long,i trimmed them off,(about 3/32 ) and that cured most of my problems.

Tim
 

·
Registered
Joined
·
3,153 Posts
Hey Tim, welcome. Did you check the fuse. If the hazards work and sequence it sounds like the fuse...

Bruce
 

·
Registered
Joined
·
1,238 Posts
bruter

Thanks for that web site...I found something I was looking for.
 
1 - 7 of 7 Posts
Top