Mercury Cougar Owners banner
1 - 1 of 1 Posts

· Registered
36 Posts
Discussion Starter · #1 ·
I also have a 5.0 Roller Engine on the stand I am building to sell. It will be about 400/450 HP on pump gas. New performance Competition Cams Hyd Roller, New Ford Racing Roller Valve Springs, Roller Lifters, & Machined Steel Ford Racing Roller Timing Set. Arp Rod Bolts & Keith Black Domed Top Pistons .030 oversize. Price depends on whether I complete the Build up with Aluminum Heads or Dart Iron Heads. With Aluminum Hds & Roller Rockers $3,995.00. Give me a call or email. [email protected] or 704-515-8033.

91 Mustang GT Street/Strip Body only With Title. 6pt Rollbar, Sub-Frame Connectors, Hi back Race Seat w/Cover, RJS Harness, Hurst Quarter Stick Shifter, Fuel Cell, Drag Shocks, Race Springs Frt & Rr. Moser 31 spline Axles Mini Spool, 4:88 Gears, Upper & Lower Control Arms. All Parts are NEW and already Installed except for Front Springs. Over $7,500 invested. Sell Everything for $4,700 obo. [email protected] or 704-516-8033.

I have a 500-525 + Horsepower Stroker 377 Windsor with Edelbrock Performer RPM Aluminum Heads with ARP Head Bolts. A Victor Intake, .536/.560 Solid Lifter Cam, Childs & Alberts Light Weight Sportsman 6.125 Steel Rods, Weisco Custom 10.5 to 1 Pistons, Crane Gold Roller Rockers, Fox Body Oil Pan and much More. This engine is New, but we did install it in a 3,000 lb Real Street 90 LX Hatchback with only 4:10, gears a Power Glide, & very old test & tune 26x10 MTs. This Car usually runs 5.40s in the 1/8th with a 408 Stroker and about 200 to 250 shot of NOS. With my 10.5 to 1 compression 377 the car went a Fantastic 6.94 & 98 MPH on Motor. NO Power Adders at all. The guy who owns and races the LX figures it would easily run 6.70s with a little more gear & better tires & 5.90s with a 150 to 175 shot of NOS. You just can't build anything better for the Price I am asking and you can drive it every day on pump gas. It really sounds great too. Over $8,000.00 invested Sell for only $6,700.00 or Best offer. I am interested in a Mercury Cougar decent project 1969/70 & have interest in a 1970/71 Mercury Cyclone. Email, [email protected] or 704-516-8033.

351-Cleveland Race Engine. A 600+HP 12.5 to 1 compression Forged Speed Pro Pistons .030 with file fit Plasma Moly Rings. I have Headers & Oil Pan Available for a little extra $$$ for Old 60s/70s style car Or newer Fox Body Style Cars of the 80s/90s. Engine has Solid .657 Lift Cam, Ported & Polished Heads, Stainless Steel Valves, Screw In Studs & Guideplates Ford Racing Nascar Severe Duty 1.65 Ratio Alum Roller Rockers. This style was used before the Jesel Shaft Rockers. Holley Strip Dominator Intake Manifold, Oil Restrictor Kit installed & Too Much More to List. Can email Pictures. All New Never Fired. I do have a test stand & can Fire Up for serious Buyer set Timing & Break in so it is ready to run when received. $6,000.00 for Engine. Email [email protected] or 704-516-8033.

88 Thunderbird V-6 Car w/title. Great Dark Blue Body. Did run when parked. Purchased for 460 eng swap. Never started swap because of other projects. Sell Car for $1,250.00 or best offer. and I have Headers, Oil Pan, & Mounts for 460 in a Fox body for $1,000 to buyer of car. I have already installed 5 lug Rotors on the front. I do have parts for a 650 plus Horsepower 460 for sale too. email, [email protected] or call 704-516-8033.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.