Mercury Cougar Owners banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I am going to rebuld the door hinges on the drivers door of my 70 standard Cougar. Is there a place to unplug the wire going through the door jamb to the door? I can see a plug above the kick panel, but it is an empty plug-nothing is plugged into it. Did I just not reach around in there enough yet? I do not want to cut original wires and have to re splice them- my interior courtesy lights all work and I would like to keep it that way. Please excuse my ignorance, I am a Mustang guy. Thanks for the help!!
 

·
Registered
Joined
·
913 Posts
Well I guess I will try and answer this, There are plugs you can pull apart,but they are under the dash pad along with a ground wire that is fastened to the metal with a screw. The way I would do it is, remove the door panel unhook the wires and pull the wires and plastic plug out the end of the door and don't worry about the dash.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top