[Mike337]

Still pulling parts out prior to paint. Does the wiring for the headlights that connects at the firewall just pull off the back of the fuse panel. Looks like it should, but I just don't want to start trying to separate it and break something.

Mike

 

[390XR7]

There should be a 3/8" bolt on the fuse box that holds the headlight wire harness to it.just unscrew the bolt inside and you should be able the separate the two.

Terry

 

[Mike337]

Thanx Terry, I thought that bolt just held the fuse box to the firewall. Good thing I asked!

Mike

 

[badcatt]

As I recall, once you get the bolt loose you remove the fuse box, then depress the tangs that hold the engine bay harness to the fire wall. Good luck with the project.

 

[Mike337]

Done! Worked out just as you both said!

Thanx Again!