Mercury Cougar Owners banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
268 Posts
Discussion Starter #1
Took a working regulator and installed it my 68, but the window seems to hang up at the back. I have to pull up on the back of the glass when rolling it up and push down when rolling it down. The only thing I unbolted besides the regulator was the bottom of the front window guide. Is there any other adjustment needed to make it roll up and down evenly?
 

·
Registered
Joined
·
137 Posts
The same thing happened to me when I rebuilt my windows. It turned out to be the door skin lip was a little bent and the newly installed rubber drip rail was hanging up on the window frame. I bent the lip a little until the rubber cleared.

There are a bunch of other adjustments (too many almost... confusing) for the main and vent window. Mostly up front and on top.

Where do you live in North Florida? Going to Daytona this weekend?
 

·
Registered
Joined
·
2,991 Posts
Greg, do you have a '68 Shop Manual. If so, page 17-48 has the instructions to adjust the window and page 17-50 has the diagram (Fig. 5). John
 
1 - 3 of 3 Posts
Top