Fmx 31 spline torque converter help
Results 1 to 10 of 10

Thread: Fmx 31 spline torque converter help

\r\n\r\n
\r\n
\r\n \r\n
\r\n \r\n \n
\r\n captmmac1\r\n \r\n
\n\r\n \ncaptmmac1 is offline\r\n\n\r\n \r\n \r\n Registered User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
Join Date
Sep 2014
\r\n
Location
Above Atlanta ga
\r\n \r\n
Posts
146
\r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n\r\n
\r\n \r\n
\r\n \r\n

\r\n Fmx 31 spline torque converter help\r\n

\r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n Hello cant find anywhere a fmx tourque converter for my cougar elim 351c Mine is a 31 spline and all that I see are 29 model fmx PHB-P RS Is this a special FMX TO THE ELIMINATOR?
\n
\nOrdered one from Summitt and had engine on crane ready to go in and converter would not fit...
\n
\nI do see 31 spine c6
\n
\nMichael MacLeod 70 cougar elim\r\n
\r\n
\r\n\r\n \r\n\r\n\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n\r\n\n\n'; pd[995813] = '\n\n\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n \r\n \r\n Royce Peterson\'s Avatar\r\n \r\n \r\n \r\n
    \r\n \r\n \n
    \r\n Royce Peterson\r\n \r\n
    \n\r\n \nRoyce Peterson is offline\r\n\n\r\n \r\n \r\n Moderator\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2002
    \r\n
    Location
    Dallas, Tx
    \r\n
    Age
    62
    \r\n
    Posts
    10,954
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Fmx 31 spline torque converter help\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n You should have 29 splines if it is a Fomoco / Mercury FMX. Best bet is to call the converter manufacturer. If you ordered the correct one for an FMX it should fit your FMX.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    Royce Peterson
    \nCCOA MEMBER #590
    \n1968 GT-E 427 XR-7 Augusta Green / Saddle It looks all stock Heh - Heh
    \n1968 XR-7 428CJ Ram Air Red / Black / Black C6
    \n1910 Model T Ford Touring Red/ / Black
    \n1914 Model T Ford touring Maroon / Black
    \n1915 Ford Model "T" Touring.....Black / Black (of course)
    \n1917 Ford Model T Roadster Green / Black
    \nXR7-G Registrar
    \nCURBSTER Hidden Content
    \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\n\n'; pd[995819] = '\n\n\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #3\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \n
    \r\n captmmac1\r\n \r\n
    \n\r\n \ncaptmmac1 is offline\r\n\n\r\n \r\n \r\n Registered User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Sep 2014
    \r\n
    Location
    Above Atlanta ga
    \r\n \r\n
    Posts
    146
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Fmx 31 spline torque converter help\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Royce Im going out to make sure its a fmx the shaft is 31 spline It could be c6 Ill let you know best mike\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\n\n'; pd[995821] = '\n\n\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #4\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n \r\n \r\n Royce Peterson\'s Avatar\r\n \r\n \r\n \r\n
    \r\n \r\n \n
    \r\n Royce Peterson\r\n \r\n
    \n\r\n \nRoyce Peterson is offline\r\n\n\r\n \r\n \r\n Moderator\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2002
    \r\n
    Location
    Dallas, Tx
    \r\n
    Age
    62
    \r\n
    Posts
    10,954
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Fmx 31 spline torque converter help\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Easy to tell the difference. FMX has a separate bell housing and is cast iron. C6 has an integral bell housingand is all aluminum.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    Royce Peterson
    \nCCOA MEMBER #590
    \n1968 GT-E 427 XR-7 Augusta Green / Saddle It looks all stock Heh - Heh
    \n1968 XR-7 428CJ Ram Air Red / Black / Black C6
    \n1910 Model T Ford Touring Red/ / Black
    \n1914 Model T Ford touring Maroon / Black
    \n1915 Ford Model "T" Touring.....Black / Black (of course)
    \n1917 Ford Model T Roadster Green / Black
    \nXR7-G Registrar
    \nCURBSTER Hidden Content
    \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\n\n'; pd[995823] = '\n\n\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #5\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \n
    \r\n captmmac1\r\n \r\n
    \n\r\n \ncaptmmac1 is offline\r\n\n\r\n \r\n \r\n Registered User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Sep 2014
    \r\n
    Location
    Above Atlanta ga
    \r\n \r\n
    Posts
    146
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Fmx 31 spline torque converter help\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Some history on the 70 Elim The Marti report said fmx The guy that I bought the car from said fmx I did notice during restoration that there was no rust in center where cast iron should be but just thought it was painted.
    \nSo last night after lots of research I found the easiest way to determine a 1970 ish ford tranny was the count the bolts on the tranny pan.
    \nSo a few min\'s ago I did!!! Guess what I have a c-6 with 17 bolts I was thinking of doing a swap a year ago glad I didn\'t Summitt was great they going to pay for Torque converter return and I\'m going to order one now Thanks again mike\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\n\n'; pd[995835] = '\n\n\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #6\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n \r\n \r\n ndtorque\'s Avatar\r\n \r\n \r\n \r\n
    \r\n \r\n \n
    \r\n ndtorque\r\n \r\n
    \n\r\n \nndtorque is offline\r\n\n\r\n \r\n \r\n Registered User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Sep 2013
    \r\n
    Location
    ND USA
    \r\n
    Age
    56
    \r\n
    Posts
    2,049
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Fmx 31 spline torque converter help\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n I am glad you got it figured out.... on a side note ... Summitt has always been very generous to me... they seem to understand things happen and are more then willing to help a customer out as much as they can ..\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\n\n'; pd[995847] = '\n\n\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #7\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \n
    \r\n captmmac1\r\n \r\n
    \n\r\n \ncaptmmac1 is offline\r\n\n\r\n \r\n \r\n Registered User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Sep 2014
    \r\n
    Location
    Above Atlanta ga
    \r\n \r\n
    Posts
    146
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Fmx 31 spline torque converter help\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Put the new converter in the c-6 and the engine in fine now Even got the Sanderson shorty headers in,,, Thanks again.. Best\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\n\n'; pd[995853] = '\n\n\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #8\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n \r\n \r\n ndtorque\'s Avatar\r\n \r\n \r\n \r\n
    \r\n \r\n \n
    \r\n ndtorque\r\n \r\n
    \n\r\n \nndtorque is offline\r\n\n\r\n \r\n \r\n Registered User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Sep 2013
    \r\n
    Location
    ND USA
    \r\n
    Age
    56
    \r\n
    Posts
    2,049
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Fmx 31 spline torque converter help\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n one step at a time... you will get there.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\n\n'; pd[995859] = '\n\n\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #9\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n \r\n \r\n dfwcatsclub\'s Avatar\r\n \r\n \r\n \r\n
    \r\n \r\n \n
    \r\n dfwcatsclub\r\n \r\n
    \n\r\n \ndfwcatsclub is offline\r\n\n\r\n \r\n \r\n Registered User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jun 2002
    \r\n
    Location
    Texas
    \r\n
    Age
    56
    \r\n
    Posts
    2,139
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Fmx 31 spline torque converter help\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Quote Originally Posted by captmmac1\r\n View Post\r\n
    \r\n
    Hello cant find anywhere a fmx tourque converter for my cougar elim 351c Mine is a 31 spline and all that I see are 29 model fmx PHB-P RS Is this a special FMX TO THE ELIMINATOR?
    \n
    \nOrdered one from Summitt and had engine on crane ready to go in and converter would not fit...
    \r\n \r\n
    \r\n
    \r\n
    \nI think you\'ve got something mixed up. The output shaft is 31 spline just like the C6. But the input shaft is not. All FMX have a common input shaft. So any of the converters that fit FMX will be fine.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    1970 Std Coupe, owned since 1983
    \nwas an M code 351C, FMX, 3:00 open, AC/PS/PB
    \nNow: 418W, 622HP natural, 950 Holley, Super Victor, solid roller custom cam, AFR205\'s ported, C6,3.50TL
    \nBest (old) ET all motor: 11.24 @ 119.5
    \nBest mph all motor: 120.5
    \n7.13 @ 96.5 1/8mi, 1.54 60\' time
    \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\n\n'; pd[995861] = '\n\n\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #10\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \n
    \r\n captmmac1\r\n \r\n
    \n\r\n \ncaptmmac1 is offline\r\n\n\r\n \r\n \r\n Registered User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Sep 2014
    \r\n
    Location
    Above Atlanta ga
    \r\n \r\n
    Posts
    146
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Fmx 31 spline torque converter help\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n whatever you call the shaft that goes all the way in the torque converter 31 for a fmx it is 29 not a tranny guy for sure thanks mike\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\n\n'; // next/previous post info pn[995811] = "995861,995813"; pn[0] = ",995811"; pn[995813] = "995811,995819"; pn[995819] = "995813,995821"; pn[995821] = "995819,995823"; pn[995823] = "995821,995835"; pn[995835] = "995823,995847"; pn[995847] = "995835,995853"; pn[995853] = "995847,995859"; pn[995859] = "995853,995861"; pn[995861] = "995859,995811"; // cached usernames pu[0] = guestphrase; pu[52305] = "captmmac1"; pu[789] = "Royce Peterson"; pu[25330] = "ndtorque"; pu[1033] = "dfwcatsclub"; // -->

    Threaded View

    Previous Post Previous Post   Next Post Next Post
    1. #1
      Join Date
      Sep 2014
      Location
      Above Atlanta ga
      Posts
      146

      Fmx 31 spline torque converter help

      Hello cant find anywhere a fmx tourque converter for my cougar elim 351c Mine is a 31 spline and all that I see are 29 model fmx PHB-P RS Is this a special FMX TO THE ELIMINATOR?

      Ordered one from Summitt and had engine on crane ready to go in and converter would not fit...

      I do see 31 spine c6

      Michael MacLeod 70 cougar elim

    Thread Information

    Users Browsing this Thread

    There are currently 1 users browsing this thread. (0 members and 1 guests)

      Bookmarks

      Posting Permissions

      • You may not post new threads
      • You may not post replies
      • You may not post attachments
      • You may not edit your posts
      •