need inside fender shields [Archive] - Classic Cougar Forums

: need inside fender shields



Stangwires
January 4th, 2010, 12:09 AM
Just wondering how I would go about replacing the inside fender shields on my '68. They have them for a mustang, but they don't work very well because the fender contour is different. I could probably use the old ones as patterns if I could find the right material to make them from. Any ideas?

68PUMA
January 4th, 2010, 07:52 AM
I bought my pair of front splash shields from WCCC: www.cougarpartscatalog.com/frfespsh.html (http://www.cougarpartscatalog.com/frfespsh.html) .

DrCougar
January 4th, 2010, 08:59 AM
You can buy the rubber shield material in bulk. I don't sell if very often because most people don't have good old ones to use as patterns. By the time I cut them out manually they become to way to expensive to sell. If you are interested in the bulk material send me a PM.